EasyManuals Logo

Huawei EchoLife HG8010 User Manual

Huawei EchoLife HG8010
364 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #225 background imageLoading...
Page #225 background image
1. Enter http://192.168.100.1 in the address bar of IE (192.168.100.1 is the default IP address
of the HG8010/HG8110/HG8240/HG8245/HG8247/HG8447), and then press Enter to
display the login interface, as shown in Figure 3-8.
Figure 3-8 Login interface
2. In the login interface, enter the use name and password, and select your preferred language.
For details about default settings of the user name and password, see Table 3-13. After the
password authentication is passed, the Web configuration interface is displayed.
----End
3.4.4 Configuring the Internet Access Service on the Web Page
This topic provides an example of how to configure the Internet access service on the Web page.
Prerequisite
l The Layer 2 service channels between the OLT and ONTs are enabled by running the OLT
commands. For details, see Enabling Layer 2 Service Channels Between an OLT and
a GPON ONT (on the OLT CLI).
l You have established the environment for logging in to the Web page for service
configuration and have successfully logged in to the Web page. For details, see 3.4.3
Locally Logging in to the Web Interface.
l The user-side PC must be connected with the LAN port of an ONT by using network cables.
Context
The Internet access service includes the Layer 2 Internet access service and Layer 3 Internal
access service.
l Layer 2 Internet access service: The PPPoE dialup is performed on the PC. The IP address
is allocated by the upper-layer BRAS. The ONT is connected to the OLT and then to the
upper-layer network in the Layer 2 mode to provide the high-speed Internet access service.
l Layer 3 Internet access service: The PPPoE auto dialup is performed on the ONT. The IP
address is allocated by the DHCP IP address pool on the ONT. The ONT is connected to
the OLT and then to the upper-layer network in the Layer 3 mode to provide the high-speed
Internet access service.
You do not need to configure the Layer 2 Internet access service on the ONT, but you need to
only enable the Layer 2 service channels between the OLT and ONT. This topic describes only
how to configure the Layer 3 Internet access service.
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual 3 Configuration
Issue 02 (2011-12-08) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
217

Table of Contents

Other manuals for Huawei EchoLife HG8010

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei EchoLife HG8010 and is the answer not in the manual?

Huawei EchoLife HG8010 Specifications

General IconGeneral
BrandHuawei
ModelEchoLife HG8010
CategoryTouch terminals
LanguageEnglish

Related product manuals