Huawei FusionServer Pro 2288H V5 User Manual

Module Feature Description
Error Injection Support Injects errors to verify various RAS
features.
Machine Check Architecture Provides software recovery for
uncorrectable errors to improve system
availability.
eMCA: Gen2 Improves system availability.
OOB access to MCA registers The OBB system accesses MCA registers
by using the Platform Environment Control
Interface (PECI). If a fatal error occurs in
the system, the out-of-band system collects
onsite data to facilitate fault analysis and
locating and improve system serviceability.
BIOS Abstraction Layer for
Error Handling
The BIOS processes errors and reports the
error information to the OS and the server in
compliance with specifications to improve
system serviceability.
BIOS-based Predictive
Failure Analysis (PFA)
The BIOS provides physical unit
information for DIMM errors, and the OS
traces and predicts errors, and isolates error
memory pages.
A.7 Sensor List
Sensor
Description Component
Inlet Temp Air inlet temperature Left mounting ear
Outlet Temp Air outlet temperature Mainboard
PCH Temp PCH bridge temperature Mainboard
CPUN Core Rem CPU core temperature CPUN
N indicates the CPU ID. The
value is 1 or 2.
CPUN DTS CPU DTS value CPUN
N indicates the CPU ID. The
value is 1 or 2.
CPUN Margin CPU Margin CPUN
N indicates the CPU ID. The
value is 1 or 2.
FusionServer Pro 2288H V5 Server
User Guide
A Appendix
Issue 08 (2019-10-30) Copyright © Huawei Technologies Co., Ltd. 164

Huawei FusionServer Pro 2288H V5 Specifications

General

Form Factor	2U rack server
Processor	Intel Xeon Scalable processors
Max Processors	2
Memory	Up to 3 TB
Memory Type	DDR4
Operating Temperature	5°C to 40°C
Storage	Supports up to 12 x 3.5-inch drives
RAID Support	RAID 0, 1, 5, 6, 10, 50, 60
Network	4 x GE ports
Power Supply	800W or 1600W PSU options
Dimensions (H x W x D)	86.1 mm x 447 mm x 748 mm