> For iOS or Andro id sma rtphones: Start Huawei
M-Control. Select Media Sharing > My phone,
select the picture you want to push to your TV,
and touch
.
Pushing videos, music, and pictures from your smartphone to your
TV (
The following example shows you how to push pictures
)
> For smartphones running Huawei EmotionUI 2.0 or
later: Select the picture you want to push to your TV,
and touch .
Refer to the onscreen instructions to see how to perform other actions.
5
What can I do if nothing is displayed after I connect my TV to M220?
• Make sure the power cable and HDMI cable are connected securely.
• Wake up your M220 if it is asleep.
• Replace the HDMI cable if it is damaged.
I connected M220 to my TV, but the image isn't displayed properly. I am experiencing
issues such as incorrect video ratio, color distortion, or color bars. What can I do?
• Make sure the HDMI cable is connected securely.
• Select Settings > Display and adjust the settings based on the actual video
display effect.
• Replace the HDMI cable if it is damaged.
What can I do if I cannot hear any sounds after I connect M220 to my TV?
• The TV's speakers may have been muted. If this is the case, press the mute/
unmut
e key on the TV's remote control to unmute the speakers.
• The TV's or M220's speaker volume may have been reduced to the minimum
value . If this is the case, pres s the volu me up key on the remote control to
increase the volume.
What can I do if the remote control is not responsive?
• Check that the battery have suffi cient power and are installed properly.
• When you are holding the remote control, stay within 8 meters of your M220.
What can I do if I can't install the Huawei M-Control application?
• Completely remove t
he cu rren t version you have and then perform a clean
install.
What can I do if I cannot use my M220 to access a network?
• The password you use to access the
wireless
network may have been changed.
FAQs
If this is the case, reconnect to the network using the new password.
• Your router may be malfunctioning. If this is the case, try recovering the router.
In extreme cases, you may need to replace your router.
• The router may not be connected to an external network.
If this is the case,
connect the router to an external network.
• The external network may be experiencing errors. If this is the case, contact
your Internet service provider.
• If the problem persists, disconnect your M220 from its power supply and then
reconnect everything.
How do I improve my M220's wireless reception?
• Make sure that the TV is not blocking the M220.
• Keep yo ur M220 away from so urc es of interfere nce , such as m icr owa ves ,
el
ectromagnetic ovens, and similar devices.
• Place the M220 near the wireless router.
• Use a device, such as a Wi-Fi repeater, to expand the coverage area.
My M220 cannot identify a USB hard disk. What can I do?
• Your portable hard disk may not have sufficient power. u se another external
power supply.
My M220 cannot detect a USB fl ash drive or microSD card connected to it. What
can I do?
• Reconnect the USB fl ash drive or microSD card to your M220. If the problem
persists, disconnect the M220 from the power supply and restart it.
How do I reset my M220?
• Go to
Settings > Personal > Backup and reset and sel ect Factory data
reset
。
Quick Start
Copyright © Huawei Technologies Co., Ltd. 2014. All rights reserved.
This document is for reference only. Nothing in this guide constitutes a warranty of
any kind, expressed or implied.
For more information
Please visit http://consumer.huawei.com/en/support/hotline for recently updated
hotline and email address in your country or region
.
M220
96722931_01
To Previous Page
Loading...
Need help?
General
