3 Touch Define priority interruptions > Whitelist for calls and messages > to add
contacts to the whitelist.
When do not disturb mode is enabled, your phone will only ring or vibrate when chosen contacts
call or message you. Your phone will mute ringtones or vibrations for any other calls or
messages. Notifications for these can be viewed in the notification panel.
Configuring the harassment filter
The harassment filter automatically blocks calls and messages from unknown or blacklisted
sources. The blacklist is constantly updated, ensuring that you are never disturbed.
Open Phone Manager, then touch Harassment filter to configure filter rules and the
blacklist or whitelist. For more information, see Harassment filter.
You can also open Dialer and then touch > Harassment filter to configure the
harassment filter.
Configuring voicemail
Divert calls to your voicemail when your phone is switched off or unavailable. Callers can leave a
voice message which you can listen to later.
Voicemail must be supported by your carrier. Please ensure that you have subscribed to this
service. Contact your carrier for information about their voicemail service.
1 Open Dialer.
2 Touch > Settings
3 Touch Additional settings. If your phone has dual SIM support, touch Additional settings
under Card 1 or Card 2.
4 Touch Voicemail > Voicemail number and then enter your voicemail number.
When you receive a voicemail message, the
icon is displayed in the status bar. Dial the
voicemail number to retrieve the message.
Creating a contact
The number of contacts you can store on your phone depends on the size of your phone's
internal storage. The maximum number of SIM card contacts may vary depending on your
SIM card's storage capacity.
1 Open Contacts.
2 Touch . Touch Create a new contact if you are creating a contact for the first time.
3 Select a location to save the contact from the options menu.
4 Enter the contact's name, phone number and other information, and then touch
.
Calls and Contacts
30
To Next Page
Loading...
Need help?
General
