Husqvarna 128LD User Manual

English---17
115275126 Rev. 1 9/15/09
STARTING AND STOPPING
Warm engine
With a warm engine, move the blue engine
choke lever to the ½ position. Pull starter
rope until engine runs. Move the blue
engine choke lever to the opened position.
Stopping
Stop the engine by pushing and holding
the stop switch in the STOP position until
the engine stops.
WARNING: Whentheengineis
started with the choke in the closed
position the cutting attachment will
start to rotate immediately.

Husqvarna 128LD Specifications

General

Engine Type	2-stroke
Maximum Power Speed	8000 rpm
Shaft Type	Straight
Cylinder Displacement	28 cm³
Power Output	0.8 kW
Fuel Tank Volume	0.4 liters
Cutting Width	17 inches
Starter System	Recoil