English--- 9
545196768 Rev. 3 5/15/09
GENERAL SAFETY PRECAUTIONS
Sharpening grass cutters and
grass b lades
S See the cutting attachment packaging for
correct sharpening instructions. Sharpen
blades and cutters using a single--cut flat file.
S Sharpen all edges equally to maintain the
balance of the blade.
Check the cutting attachment for damage
or cracks. A damaged cutting attachment
should always be replaced.
W ARNING: Always discard a
blade that is bent, twisted, cracked,
broken or damaged in any other
way . Never attempt to straighten
a twisted blade so that it can be re-
used. Only use original blades of
the specified type.
Trimmer he a d
S Only use the recommended cutting at-
tachments. See the section on “Technical
data”.
IMPORTANT!
Always ensure the trimmer line is wound
tightly and evenly around the drum, other-
wise the machine will generate harmful
vibration.
S Smaller machines generally require small
trimmer heads and vice versa. This is be-
cause when clearing using trimmer line
the engine must throw out the trimmer
line radially from the trimmer head and
overcome the resistance of the grass
being cleared.
S The length of the trimmer line is also im-
portant. A longer trimmer line requires
greater engine power than a shorter
trimmer line of the same diameter.
S Make sure that the cutter on the trimmer
guard is intact. This is used to cut the
trimmer line to the correct length.
S To increase the life of the trimmer line it
can be soaked in water for a couple of
days. This will make the line tougher so
that it lasts longer.
General rules
Only use cutting attachments with the
guards we recommend! See the section on
Technical data.
Keep the teeth of the blade correctly sharp-
ened! Follow our instructions and use the
recommended file gauge. An incorrectly
sharpened or damaged blade increases the
risk of accidents.
Cutting equipment
Grass blades and grass cutters are in-
tended for cutting coarse grass.
A trimmer head is intended for trimming
grass.
To Next Page
Loading...
Need help?
General
