KEY TO SYMBOLS
Symbols on the machine and/or in
the man
ual:
W
ARNING! Clear
ing sa
ws
,
brushcutters and trimmers can be
dangerous! Careless or incorrect use
can result in serious or fatal injury to
the operator or others. It is extremely
important that you read and understand the contents of
the operator's manual.
Please read the operator’s manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
Wear a protective helmet where there
is a risk of falling objects
• Approved hearing protection
• Approved eye protection
Max. speed of output shaft, rpm
This product is in accordance with
applicable EC directives.
Watch out for thrown objects and
ricochets. (129L, 129LK)
Watch out for thrown objects and
ricochets. (129C)
The operator of the machine must
ensure, while working, that no
persons or animals come closer than
15 meters.
Always wear approved protective
gloves.
Wear sturdy, non-slip boots.
Only use non-metallic, flexible cutting
attachments, i.e. trimmer heads with
trimmer cord.
Arrows which show limits for handle
positioning.
Noise emission to the environment
according to the European
Community’s Directive. The
machine’s emission is specified in
the Technical data chapter and on the
label.
Other symbols/decals on the machine refer to
special cer
tification requirements for certain
markets.
The engine is switched off by moving
the stop switch to the stop position.
CAUTION! The stop switch
automatically returns to the start
position. In order to prevent
unintentional starting, the spark plug cap must be
removed from the spark plug when assembling, checking
and/or performing maintenance.
Always wear approved protective
gloves.
Regular cleaning is required.
Visual check.
10000
5
0
FT
15
m
50FT
15 m
To Next Page
Loading...
Need help?
General
