KEY
T
O SYMBOLS
2
–
English
Symbols
W
ARNING! A clearing saw,
brushcutter or tr
immer can be
dangerous if used incorrectly or
carelessly, and can cause serious or
fatal injury to the operator or others. It
is extremely important that you read
and understand the contents of this operator’s manual.
Please read the operator’s manual
carefully and mak
e sure y
ou
understand the instructions before
using the machine.
Always wear:
• Wear a protective helmet where
there is a r
isk of f
alling objects
• Approved hearing protection
• Approved eye protection
Max. speed of output shaft, rpm
This product is in accordance with
applicable EC directiv
es.
Watch out for thrown objects and
r
icochets
.
The operator of the machine must
ensure
, while w
orking, that no
persons or animals come closer than
15 meters.
Machines fitted with saw blades or
gr
ass blades can be thrown violently
to the side when the blade comes into
contact with a fixed object. This is
called blade thrust. The blade is
capable of amputating an arm or leg.
Always keep people and animals at
least 15 meters from the machine.
Arrows which show limits for handle
positioning.
Ignition;
choke:
Set the choke
control in the chok
e position.
This
should automatically set the stop
switch to the start position.
Air purge
Always wear approved protective
glo
v
es.
Wear sturdy, non-slip boots.
Noise emission to the environment
according to the European
Comm
unity’
s Directive. The machine’s
emission is specified in the Technical
data chapter and on the label.
Keep all parts of your body away from
hot surfaces.
Other symbols/decals on the
machine refer to special certification
requirements f
or cer
tain markets.
The type plate
showing production
number
.
yyyy
is
the production
y
ear
,
ww
is the
productionweek and
xxxxx
is the ser
ialnumber.
Switch off the engine by moving the
stop switch to the ST
OP position before
carrying out any checks or
maintenance.
Always wear approved protective
glo
v
es.
Regular cleaning is required.
Visual check.
Approved eye protection must always
be used.
10000
5
0
FT
15
m
50FT
15 m
yyyywwxxxxx
H1159210-30, GBESPT Page 2 Friday, October 6, 2017 1:00 PM
To Next Page
Loading...
Need help?
General
