Maintenance of the chain saw
Fig. 19
Daily maintenance
1. Clean the saw body from the outside.
2. Clean the air filter. Change if necessary
11
16
3. Turn around the guide bar, lower edge up. Clean the bar
groove.
4. Clean the fan and air intakes in the starter cover.
5. Clean the cooling fins on the cylinder
6. Clean the space under the clutch cover.
7. Sharpen the chain and check its tension
8. Check the oiling system for the chain and the guide bar.
9. Clean the chain brake. Make it a habit to lock the chain
brake during pauses and transports.
Weekly maintenance
10. Check the starter, its cord and return spring.
11. Clean the spark plug from the outside and check the gap
Adjust the gap or change the plug If necessary.
12. File off burrs if any on the sides of the guide bar
13. Lubricate the bearings of the clutch drum.
Monthy maintenance
14. Wash out the fuel tank with petrol
15. Wash out the oil tank with petrol.
16. Clean the carburetor.
17. Clean the spark plug.
Fig, 20
To Next Page
Loading...
Need help?
General