Husqvarna 326LS User Manual

24 – English
TECHNICAL DATA
The accessories are recommended for use in combination with the specified power heads and have been evaluated to applicable
ISO- and EN safety requirement standards by the Swedish Machinery Testing Institute.
The accessories have been developed mainly for the Husqvarna 125LD trimmer, but can also be used in combination with the
specified power heads and have been evaluated to applicable ISO- and EN safety requirement standards by the Swedish
Machinery Testing Institute.
The accessories used in combination with the specified power heads have been evaluated to ANSI B175.3-2003 Grass Trimmers
and Brushcutters - Safety Requirements. These combinations have been evaluated by Underwriters Laboratories Inc. (UL) and are
consequently UL listed.
Powerhead model Accessories Art No.
326LDx
Hedge trimmer attachment with shaft HA 110 537 19 66-01
Hedge trimmer attachment with shaft HA 850 537 19 66-02
Clean sweep attachment with shaft SR600 537 19 67-01
Edger attachment with shaft 537 19 69-01
Saw attachment with shaft PA 1100 537 18 33-17
Cultivator attachment with shaft CA 150 537 42 54-01
326L, 326LS, 326Lx Saw attachment without shaft PA 537 18 33-12
Powerhead model Accessories Art No.
326LDx
Cultivator attachment CAC 952 71 19-07
Edger attachment EAC 952 71 19-08
Pole saw attachment PAC 952 71 19-10
Blower attachment BAC 952 71 19-11
Hedge trimmer attachment HAC 952 71 19-21
Powerhead model Accessories Type
Cutting attachment guard,
Art. no.
326C
Blade shaft thread 3/8 R
Plastic blades Tricut Ø 230 mm (R) 537 02 61-01 / 537 07 67-01
Trimmer head
Trimmy Hit Junior (R) 537 02 61-01 / 537 07 67-01
Trimmy Fix (R) 537 02 61-01 / 537 07 67-01
Trimmy Hit VII (R) 537 02 61-01 / 537 07 67-01
T25 (R) 537 02 61-01 / 537 07 67-01
T25C 537 02 61-01 / 537 07 67-01
326L, 326LS, 326Lx, 326LDx
Arbor shaft thread M10
Plastic blades Tricut Ø 300 mm 503 93 42-02
Trimmer head
Trimmy H II 1" 503 93 42-02 / 503 97 71-01
Trimmy Fix 503 93 42-02 / 503 97 71-01
Trimmy Hit 503 93 42-02 / 503 97 71-01
Trimmy Hit Pro 503 93 42-02 / 503 97 71-01
Superauto II 1" 503 93 42-02 / 503 97 71-01
T25 (L) 537 02 61-01 / 537 07 67-01
S35 503 93 42-02 / 503 97 71-01
T35 503 93 42-02 / 503 97 71-01
Art No.
326LDx Shaft TA 850 537 35 35-01

Husqvarna 326LS Specifications

General

Power output	0.8 kW
Engine type	2-stroke
Shaft type	Straight
Engine displacement	25.4 cm³
Starter system	Recoil