INSTRUCTIONS FOR DAILY USE
STEP 1:
Brew fresh coffee directly onto the recessed area of the
Hyperchiller’s lid with your compatible single cup brewer, or
carefully pour it in with a carafe. Liquid will flow through the
opening at the bottom of the lid, and into the cooling
chamber.
NOTE: It is OK to pour liquid over the vent on the recessed
area of the lid. During use it enables air to escape from the
ice chamber, so you may see small bubbles coming from it.
Also, once frozen, there is no need to take the product
apart for regular use.
STEP 2:
After the coffee is inside of the Hyperchiller, gently swirl the
product every few seconds to keep the coffee moving.
WARNING: Use caution when handling hot liquids.
STEP 3:
In as little as one minute, the coffee will
Have Cooled down by up to 130°F+.
Pour via the spout on the opposite side
of the lid into your cup and enjoy!
NOTE: Cooling time requirements
vary based On freezer temperature,
initial liquid temperature & volume,
as well as whether the product is
swirled or not. Please refer to
“Cooling Times” chart on pg. 4.
Questions? We're here to help! Visit: hyperchiller.us for support on this product.
To Next Page
Loading...
Need help?
General
