1
FEATURES OF YOUR HYUNDAI
111
1
FEATURES OF YOUR HYUNDAI
111
B970C01MC-AAT
Automatic Operation
The FATC (Full Automatic Temperature
Control) system automatically controls
heating and cooling by doing as follows:
1. Push the "AUTO" switch. The indicator
light will illuminate confirming that the
Face, Floor and/or Bi-Level modes as
well as the blower speed and air con-
ditioner will be controlled automati-
cally.
2. Turn the "TEMP" knob to set the de-
sired temperature.
The temperature will increase to the
maximum "HI" by turning the knob
clockwise.
The temperature will decrease to the
minimum "LO" by turning the knob
counterclockwise.
NOTE:
If the battery has been discharged or
disconnected, the temperature mode will
reset to Centigrade degrees.
This is a normal condition and you can
change the temperature mode from
Centigrade to Fahrenheit as follows;
Press the "OFF" and "AUTO " switch
simultaneously for 3 seconds.
The display shows that the unit of tem-
perature is adjusted to Centigrade or
Fahrenheit (°C
→→
→→
→ °F or °F
→→
→→
→ °C).
B970C01MC
B970C02MC
To Next Page
Loading...
Need help?
General
