1
FEATURES OF YOUR HYUNDAI
30
!
WARNING:
o Never let anyone ride in the rear
center seat without fastening all
metal tabs and buckles as described
in this section. This seat belt is
designed to function as a typical 3-
point restraint (lap/shoulder belt).
Using only the shoulder portion or
lap portion of the belt can result in
serious or fatal injuries in the event
of a collision or sudden stop.
o Never unlock the metal tab (A) and
the buckle (B) with the following ex-
ceptions.
(1) In case of folding rear seatbacks
down.
(2) If transporting an object on the
rear seat may cause damage to
the rear seat center belt.
B220D05MC
o To disconnect the metal tab (A) from
the buckle (B), insert a narrow-ended
tool into the groove located on the
buckle (B).
o Always lock metal tab (A) into buckle
(B) immediately after returning the
rear seatbacks to an upright posi-
tion. This portion of the rear center
seat belt should only be unbuckled
when the rear seatback is folded
down.
B220D04MC
There will be an audible "click" when the
tab locks in the buckle. The seat belt
automatically adjusts to the proper length
only after the lap belt is adjusted manu-
ally so that it fits snugly around your hips.
If you lean forward in a slow, easy motion,
the belt will extend and let you move
around. If there is a sudden stop or im-
pact, the belt will lock into position. It will
also lock if you try to lean forward too
quickly.
To Next Page
Loading...
Need help?
General
