IBM Storwize V7000 Unified2073-720 User Manual

IBM
®
Storwize V7000 Unified Model 2073-720 Quick Start
Guide
Total installation and configuration time takes approximately 3 hours.
Here are the installation and configuration steps covered:
1. Prepare system configuration files and place on a USB
flash drive
2. Collect and record required infrastructure information
3. Rack up and wire in the equipment
4. Initialize the Storwize
®
V7000 Unified software, using
the USB flash drive
5. Configure the Storwize V7000 Unified software, SAN
block storage
6. Configure the Storwize V7000 Unified software, NAS
file storage
7. Change the default login details and check the health
status of the system
8. Create a new NAS file system and create a NAS Share.
For detailed information view the Installing topic, located in the Information Center:
http://publib.boulder.ibm.com/infocenter/storwize/unified_ic/index.jsp
Prepare the system configuration files
1x USB flash drive is required. Use the InitTool.exe to create 2 text
files on the USB flash drive.
The following network details are required
v Storwize V7000 storage system IP
v Storwize V7000 Unified management IP
v Storwize V7000 Unified file module 1 IP
v Storwize V7000 Unified file module 2 IP
v Subnet mask
v Gateway IP for this subnet
v First IP of the internal IP address range
(this IP range is used between file modules
only, it must be 169.254.8.1)
Filename / content Content example (must be one line of
text)
satask.txt
satask mknascluster
-clusterip <Storwize V7000
storage system IP> -mask
<subnet mask> -gw
Gateway IP for this subnet
-consoleip <Storwize
V7000 Unified
management IP>
satask mknascluster -clusterip
123.123.123.20 -mask 255.255.248.0 -gw
123.123.123.1 -consoleip 123.123.123.10
cfgtask.txt
cfginit --ip=<Storwize
V7000 Unified
management IP>
--netmask=<subnet mask>
--gw=<Gateway IP for this
subnet>
--serviceip1=<Storwize
V7000 Unified file module
1 IP>
--serviceip2=<Storwize
V7000 Unified file module
2 IP> --internalips=<first
IP of the internal IP
address range>
--storwizeip=<Storwize
V7000 storage controller
IP>
cfginit --ip=123.123.123.10
--netmask=255.255.248.0
--gateway=123.123.123.1
--serviceip1=123.123.123.11
--serviceip2=123.123.123.12
--internalips=169.254.8.1
--storwizeip=123.123.123.20
© Copyright IBM Corp. 2013 1

IBM Storwize V7000 Unified2073-720 Specifications

General

Brand	IBM
Model	Storwize V7000 Unified2073-720
Category	Storage
Language	English