IBM ThinkPad 600 Hardware Maintenance Manual

Related Service Information
The following events cause the computer to enter
hibernation mode:
 The Fn + F12 keys are pressed.
 The Hibernation button is selected in the Fuel-Gauge
program.
 The power switch is turned off when hibernation
mode is set to Hibernate by Power Switch in the
Windows 98 Power Management Properties window.
 The timer conditions are satisfied in suspend mode
(for operating systems other than Windows 98).
 A critically low battery condition occurs and
hibernation mode is set to Hibernate when battery
becomes low.
The computer exits hibernation mode and resumes
operation when the Power switch is pressed. When power
is turned on, the hibernation file in the boot record on the
hard disk drive is read and system status is restored from
the hard disk drive.
28

IBM ThinkPad 600 Specifications

General

Processor	Intel Pentium II
Graphics	Neomagic MagicGraph128XD
Operating System	Windows 95, Windows 98, or Windows NT 4.0
Resolution	800 x 600
Battery	Lithium-Ion
Optical Drive	Optional external CD-ROM drive
Ports	Serial, Parallel, VGA
Network	10/100 Ethernet
Clock Speed	233 MHz to 300 MHz
Display	12.1-inch TFT