IBM ThinkPad 600 Hardware Maintenance Manual

Symptom-to-FRU Index
Symptom / Error FRU / Action in Sequence
111
(I/O parity.)
1. Go to “Memory
Checkout” on
page 33.
2. Expansion unit or port
replicator.
3. System board
11XX
1101: Serial_A test failure.
1. Serial device
2. Communication cable
3. System board
12XX
1201: Serial_B test failure.
1. System board
(infrared)
158
(The hard disk password
was not set even though the
supervisor password is set.)
Set the password for the
hard disk drive.
159
(The hard disk password is
not set the same as the
supervisor password.)
Set the correct password
for the hard disk drive.
161
(Dead battery.)
1. Go to “Checking the
Backup Battery” on
page 38.
2. Backup battery
3. System board
163
(Time and date were not
set.)
1. Set time and date.
2. System board
173
(Configuration data was
lost.)
1. Select OK in the error
screen; then set the
time and date.
2. Backup battery
3. System board
174
(Configuration error:
Perform“Checking the
Installed Devices List” on
page 42 before changing
any FRUs.)
1. Check device
configuration.
2. Hard disk drive
assembly
3. System board
175, 177, 178
175: EEPROM CRC
#1 error.
177: Supervisor
password check sum
error.
178: EEPROM is not
functional.
1. System board
17XX
1701: Hard disk
controller failure.
1780, 1790: Hard disk
0 error.
1781, 1791: Hard disk
1 error.
1. Hard disk drive
2. System board
ThinkPad 600 53

IBM ThinkPad 600 Specifications

General

Brand	IBM
Model	ThinkPad 600
Category	Laptop
Language	English