IBM ThinkPad 600e Supplementary Guide

5 Double-click on Add New Hardware.
6 Click on Next.
7 Click on Next again.
8 Select No, and click on Next.
9 Select No again, and click on Next.
10 Click on Other devices, and click on Next.
11 Click on Have Disk....
12 Type A:\
13 Click on OK.
14 Select ThinkPad Hot/Warm Swap Driver, and click on Next.
15 Click on Finish.
16 Restart the computer.
To install the hot/warm swap driver for Windows 95 , do the following:
1 Start Windows 95.
2 Insert the Utility Driver Diskette for Windows 95 into the diskette drive.
3 Click on Start and move the cursor to Settings; then click on Control Panel.
4 Double-click on Add New Hardware.
5 Click on Next.
6 Select No, and click on Next.
7 Click on Other devices, and click on Next.
8 Click on Have Disk....
9 Type A:\
10 Click on OK.
3

IBM ThinkPad 600e Specifications

General

Brand	IBM
Model	ThinkPad 600e
Category	Laptop
Language	English