■
IC-2200H Owners Manual Addendum
CALL SIGN PROGRAMMING p.58
…(each call sign memory can store up to 6 call signs...). Repeater “R1C”
and “R2C” share the 6 call sign memories.
UT-115 pgs. 2, 4, 8 and 58
Anywhere the UT-115 is referenced, it should be replaced with UT-118.
BREAK-IN COMMUNICATIONS p.65
The break in communications feature allows a user to break into a
conversation, where the two original stations are communicating with call
sign squelch enabled. The breaking station should enter the call sign of
one of the stations that they wish to communicate with. When you call
the desired station, only the selected station will hear the call. With the
Break function enabled, both stations will be able to hear the call.
©2005 Icom America Inc. 7179
Need help?
General
