Icom IC-440N User Manual

2
UNIT DESCRIPTION
2
HM-182 Description ■
PRIO
LOW
SCAN
O࡮G࡮P
CH
SET࡮P
RS
TAG
SQL
q
w
e
Speaker
Microphone
r
t
y
u
i
MONI
F
SET
TSQL
o!0 !1
Information: Up to four desired functions, one each for
Normal and Function mode, can be re-assigned to the
F
SET
,
MONI
TSQL
,
SCAN
TAG
,
O࡮G࡮P
RS
,
PRIO
SET࡮P
,
CH
SQL
and
LOW
keys with the op-
tional CS-440N
CLONING SOFTWARE. (p. 12)
The default setting is used in this instruction manual, for
description.
N : Stands for Normal mode operation.
F : Stands for Function mode operation. (Push
F
SET
(Func-
tion) to enter Function mode.)
q PTT SWITCH [PTT] (p. 16)
 Hold down to transmit; release to receive.
w VOLUME CONTROL/CH UP/CH DOWN KEYS ([VOL])
/
Push to adjust the audio level, to select an operating chan-
nel, Set mode setting and so on. (pp. 14, 19, 20)
[Volume control/Set mode setting]
Push to adjust the audio level (from 0 to 32). ➥
• “ ” appears when the audio level is set to 0 (silent mode).
Push to select settings in Set mode. ➥
[Channel Selection]
Push
CH
SQL
, then push / to select the operating channel.
(p. 14)
• “ ” appears when the Channel Selection mode is selected.
e CHANNEL/SQUELCH SELECT KEY
CH
SQL
(Channel/Squelch select mode) (pp. 14, 18)
Push to toggle between volume and Channel Selection ➥
mode.
• “ ” appears when the Channel Selection mode is selected.
• If no key is pushed within 30 seconds, the Channel Selection
mode is cancelled.
 (Squelch level select mode)
Hold down for 2 seconds to enter the squelch level ➥
selection mode, then push
or to select the
squelch level. (p. 18)
7

Icom IC-440N Specifications

General

Brand	Icom
Model	IC-440N
Category	Transceiver
Language	English