ICOM IC-705 Protective Frame Installation
(Flip Screen Cover)
Copyright 2021 Michael Aiello N2HTT, all rights reserved. Rev B 21-November-2021
Hardware Supplied
4 Button head screws M4 x 16mm, stainless steel
8 Socket head screws M4 x 10mm, black finish
2 Button head screws M4 x 12mm, black finish
2 Button head screws M5 x 45mm, black finish
2 Nylon Insert Hex Lock Nuts M5 , black finish
Your hardware packet will contain one spare of each type of hardware, in case the cat knocks
something off the workbench and it rolls under the bookshelf. Do not be alarmed that you have left
over hardware!
Tools Needed (not included.)
2 metric hex keys, 2.5mm and 3mm
Small adjustable wrench or 8mm metric socket for the lock nuts.
To Next Page
Need help?
General
