• WEATHER (WX), ON or OFF
Push func then push [4 WX-ALT] to
turn weather alert ON or OFF
– If you are experiencing an interruption every 5
seconds, turn your weather alert OFF, the “WX”
symbol will disappear from the screen
• LOCK, ON or OFF (3)
Push the KEY LOCK switch [key1] to turn ON
Push and hold switch 2 seconds to turn OFF
• SCAN, ON or OFF
Push func then push [2 SCAN]
Push [Y ] or [ Z] to change the scan direction
To stop scan, push [CLR]. To resume, push
[CLR] func [2 SCAN]
• MEMORY SCAN
Push [MR MW] to enter memory mode
Push func, then push [2 SCAN]
– To stop scanning, push [CLR]
• CLEAR ALL
Push [CLR] twice
func
func
func
func
PROGRAM FREQuENCIES INTO MEMORY
• SELECT THE DESIRED FREQUENCY
Push [CLR], then select the desired frequency by using
the keypad.
Push func then push [MR MW]
– A large “M“ will blink at the top on screen
Push [Y ] or [ Z] to select the channel
Push [ENT SET] to save
• ENTER BANK SELECTION MODE & SELECT A BANK
Push func then push [3 BANK]
Push [Y ] or [ Z] to select the bank
Push [ENT SET] to save
• FINISH WRITING TO MEMORY
Now that the channel and bank have been selected,
push [ENT SET] to save and end.
• FIND FREQUENCY IN MEMORY
Push [MR MW] and push [Y ] or [ Z] to scroll through the
memory channels, pause at each channel and the frequency will
momentarily appear
TAG (SELECT SCAN) CHANNELS
TAG channels is Icom’s way of selecting and deselecting
channels to be scanned
• TO TAG A MEMORY CHANNEL
Push [CLR] then select the desired frequency by using
the keypad
Push [MR MW] to select the memory mode, if desired, then
select the BANK.
Push func then push [3 BANK]
Push [Y ] or [ Z] to select the bank
Push func then push [9 TAG] the TAG symbol
appears, and to cancel the TAG setting, repeat above steps
– A TAG symbol will appear when TAG is ON
– The TAG function is only available for scan operation
• HOW TO DELETE CHANNELS IN MEMORY
Push [MR MW] to select memory mode
Select the desired channel to delete
Push func , then push and hold [CLR HOME] for
1 second
– The screen will read:
func
func
func
func
func
To Previous Page
Loading...
Need help?
General
