8
SET MODE
51
■ Set mode items
DD
Scan type
The transceiver has 2 scan types: normal scan and priority
scan. Normal scan searches all tag channels in the selected
channel group. Priority scan searches all tag channels in se-
quence while monitoring Channel 16.
DD
Scan resume timer
The scan resume timer can be selected as a pause (OFF) or
timer scan (ON). When OFF is selected, the scan pauses
until the signal disappears. When ON is selected, the scan
pauses 5 sec. and resumes even if a signal has been re-
ceived on any other channel than Channel 16.
DD
Weather alert
A NOAA broadcast station transmits a weather alert tone be-
fore important weather information. When the weather alert
function is turned ON, the transceiver detects the alert, then
flashes the “WX ALERT” indicator until the transceiver is op-
erated. The previously selected (used) weather channel is
checked any time during standby or while scanning.
•“WX ALERT” appears instead of “WX” indication when the function
is set ON.
DD
Dual/Tri-watch of COMMANDMIC
(Appears when connecting HM-127)
This item sets the HM-127’s [CH/WX•DW] key function as
dual watch or tri-watch.
To Next Page
Loading...
Need help?
General
