To Next PageTo Next Page
Need help?Do you have a question about the IDEAL 2404 and is the answer not in the manual?
General| Brand | IDEAL |
|---|---|
| Model | 2404 |
| Category | Paper Shredder |
| Language | English |
Defines intended use and material limitations.
Specifies standard operating conditions and acceptable materials.
Describes appropriate use and acceptable materials.
Defines standard operating conditions and acceptable materials.
Specifies standard operating conditions and acceptable materials.
Describes appropriate use and acceptable materials.
Specifies standard operating conditions and acceptable materials.
Mandatory reading of operating and safety instructions before use.
Mandatory reading of operating and safety instructions before use.
Mandatory reading of operating and safety instructions before use.
Mandatory reading of operating and safety instructions before use.
Prohibits operation of the machine by children.
Prohibits reaching into the cutting mechanism.
Warns against long hair entanglement in the cutting head.
Warns against ties and loose clothing entanglement.
Warns against jewellery entanglement in the cutting mechanism.
Ensures operation only when the door is securely closed.
Ensures free access to the mains connection.
Machine switches off automatically after 30 minutes of inactivity.
Describes automatic standby mode and manual shutdown.
Unplug the machine before cleaning or attempting repairs.
Machine must not be operated without the safety flap.
Using ON/OFF to stop and open the door.
Placing the machine on a cabinet with the control panel facing outwards.
Unfolding and inserting the plastic collection bag into guide rails.
Placing the machine on a cabinet with the control panel facing outwards.
Unfolding and inserting the plastic collection bag into guide rails.
Close the door and plug the machine into the wall socket.
Pressing the switch turns on the green light, indicating readiness.
The machine starts automatically when paper is inserted.
Machine automatically stops when no more paper is fed.
Machine stops automatically if the door is opened.
Machine stops automatically when the shred bin is full.
Machine stops automatically if too much paper is inserted or jams.
Use the 'R' switch to clear paper jams.
Press switch to restore operational readiness after a stop.
Machine stops if safety flap is opened; close flap and press switch to resume.
Machine stops with flap open; close flap and press switch to shred, or reverse to clear jams.
Oil the shredding mechanism when capacity reduces or bin is full.
Use specific oilers for straight cut and particle cut.
Lubricate mechanism if capacity reduces or bin is full.
Use specific oilers for strip cut and particle cut.
Check power connection and switch status.
Verify switch is on and paper is correctly inserted.
Ensure paper is fed into the center of the opening.
Verify the door is properly closed for operation.
Check if the shred bin is full and needs emptying.
Check if the safety flap is open, which stops operation.
Unplug and clean the photo cell if the machine doesn't stop.
Machine stops due to overload; allow 10-15 minutes for cooling.
Contact customer service if problems persist after consulting the manual.
Environmentally friendly special oil for shredder maintenance.
Lubricating sheets for shredder maintenance.
Plastic bags for collecting shredded material.
Do not shred paper clips, CDs/DVDs with specific models.
Specific models are suitable for CD/DVD destruction.
Frequent oiling is crucial when shredding CDs/DVDs.
Details specific model restrictions for paper clips and media.
Emphasizes frequent lubrication when destroying CDs/DVDs.
Machine meets EC directives and safety standards.
Specifies noise levels adhering to ISO 7779 standards.
Machine approved by safety institutes, complies with EC norms.
Workplace noise levels are below ISO 7779 maximum limits.
Machine tested by independent safety labs, compliant with EC regulations.
Details workplace noise levels according to ISO 7779.
Do not dispose of electrical equipment with household waste.
Dispose of CDs, cards, and data media separately from paper.
Dispose of defective equipment at designated collection points.
Separate shredded CDs, cards, and media from paper.
Return non-working electronics to appropriate recycling stations.
The shredder can be disassembled with standard tools.
Declaration that the machine complies with EC directives.
Lists relevant directives for electromagnetic compatibility and low voltage.
Lists applicable harmonised standards for the machine.
Identifies the authorized representative for technical documentation.
Illustrates the range of IDEAL document shredders.
Showcases the range of IDEAL trimmers and guillotines.
