LIFETIME LIMITED WARRANTY
Warranty limited solely to repair or replacement; no warranty of merchantability,
fitness for a particular purpose or consequential damages.
RATING & SPECIFICATIONS
Model: 61-063
Working Voltage Range: 40-600 VAC max to ground
Frequency: 50/60Hz
Dielectric Strength: 2000V, 1 minute, 100uA or less
during dielectric strength test
Safety: IEC61010-1 Cat III - 600V
Operating Environment: 32° to 104° F (0° to 40° C).
80% RH max. 50% RH above 31° C.
Operating Altitude: 2000m (6562 ft.)
Battery: Two (2) 1.5V button type batteries,
#61-201 (IEC #LR-44,
NEDA # 1166A)
Dimensions: 5.2”H x 1”W x .8”D
(130 x 26 x 20mm)
Weight: 1.4 oz (40g)
Instrument complies with insulation category (overvoltage category III).
Pollution degree 2 accordance with IEC-664. Indoor use. Industrial use.
CAT III equipment is designed to protect against the transients in the equipment
in fixed installations, such as distribution panels, feeders and short branch
circuits for lighting systems in large buildings.
Equipment protected by double insulation.
Maintenance
Do not attempt to repair this tester. It contains no user-serviceable parts. Repair
or serving should only be performed by qualified personnel.
Cleaning
• Remove grease and grime with a clean, dry cloth.
• Do not use abrasives or solvents.
Battery Replacement
Packaged complete with two button cell batteries and operating instructions. Install
batteries before use.
WARNING: DO NOT OPERATE WITHOUT BATTERY COVER IN
PLACE!
!
To Previous Page
Loading...
Need help?
General
