resetusb
iBTB2
DOUBLE WALL INSULATED STAINLESS STEEL BOTTLE
+ REMOVABLE WATERPROOF BLUETOOTH SPEAKER
CONTROLS & INDICATORS
BACK:
Waterproof Cover
Power
Button
USB Charge Port
Reset Port
Bluetooth
Button
Play/Pause
Button
Charge/Battery
Indicator:
Green = charged
CHARGE
SPEAKER
BEFORE USE
Connect included USB cable to USB
Charging Port (under waterproof
cover) and to USB power source
such as USB AC adapter connected
to working outlet
Red = charging
GETTING STARTED
PAIRING BLUETOOTH
Pairing the First Time
Manual Pairing
iHome
iBTB2
3s 2s
3s
PLAYING BLUETOOTH AUDIO
SPEAKERPHONE
• Press Play/Pause Button to play or pause Bluetooth audio.
• Press 2x to skip to next song
• Press 3x to skip to previous track
OR start of currrent track
• Press and hold the Power Button for 3 sec. to power OFF.
• Speaker must be ON and paired to
Bluetooth device to use speakerphone.
• Press Play/Pause Button to answer/end call
• Press and hold Play/Pause Button
for 2 seconds to decline call
HOW TO USE BOTTLE & SPEAKER
• The Bottle and Speaker can be
unscrewed to use separately
• Screw the speaker base to
bottom of bottle for best
stability when using separately
• Speaker is waterproof
(keep cover closed near water)
• See Bottle Cautions for best experience
• Unscrew cap to fill bottle
Cap
Bottle
Speaker
Base
ready
for
water
not
ready for
water
• For proper waterproof operation, make sure
the waterproof cover on the back of the unit is
completely flush with the unit by pressing
along the entire edge of the cover
until it is completely and securely in place.
iHome
iBTB2
Engish
resetusb
TIP: on some iOS (Apple) devices; you can view the iBTB2 battery status on
your device's screen. When device is paired and connected; look for a vertical
battery icon next to the Bluetooth icon on the upper right corner of the
device's screen.
Bluetooth is a registered trademarks of Bluetooth SIG Inc.
Bluetooth technology is incorporated under license from Bluetooth SIG Inc.
Battery LED
Indicator
Bluetooth LED
Indicator
Bluetooth
Indicator:
Slow blink
= auto-link
Solid
= paired
Fast blink
= pairing
QUICK START GUIDE
CHARGE
BEFORE
USE
FRONT:
• Make your Bluetooth device “discoverable”
• Press and hold the Power Button on back of speaker for 3 sec. to
power ON.
• The first time the unit is powered on it will enter auto-pairing mode.
• Select “iHome iBTB2” on your device’s Bluetooth menu to
complete pairing.
• To manually pair, power speaker ON. Press and hold Bluetooth
Button for 2 seconds, then select “iHome iBTB2” on your device’s
Bluetooth menu to complete pairing.
2s
WATERPROOF OPERATION
To Next Page
Need help?
General
