IKEA FROSTFRI User Manual

Problem Possible cause Solution
The compressor operates
continually.
Food products placed in
the appliance were too
warm.
Allow food products to cool to
room temperature before stor-
ing.
The compressor operates
continually.
The door is not closed cor-
rectly.
Refer to "Closing the door".
The compressor operates
continually.
The Fast Freezing function
is switched on.
Refer to "Fast Freezing func-
tion".
The compressor does not
start immediately after
pressing Fast Freezing, or
after the change of the tem-
perature.
This is normal, no error has
occurred.
The compressor starts after
some time.
Water flows on the floor. The melting water outlet is
not connected to the evap-
orative tray above the
compressor.
Attach the melting water outlet
to the evaporative tray.
Temperature cannot be set. The Fast Freezing function
is switched on.
Switch off Fast Freezing func-
tion manually, or wait until the
function resets automatically
to set the temperature. Refer
to "Fast Freezing function".
DEMO appears on the dis-
play.
The appliance is in demon-
stration mode.
Keep the Mode pressed for
approximately 10 seconds un-
til a long sound is heard and
display shuts off for a short
time.
The temperature in the ap-
pliance is too low/too high.
The temperature regulator
is not set correctly.
Set a higher/lower tempera-
ture.
The temperature in the ap-
pliance is too low/too high.
The food products temper-
ature is too high.
Let the food products temper-
ature decrease to room tem-
perature before storage.
The temperature in the ap-
pliance is too low/too high.
The door has been
opened too often.
Open the door only if necessa-
ry.
The temperature in the ap-
pliance is too low/too high.
The Fast Freezing function
is switched on.
Refer to "Fast Freezing func-
tion".
ENGLISH 17

IKEA FROSTFRI Specifications

General

Brand	IKEA
Model	FROSTFRI
Category	Freezer
Language	English