14
The function is deactivated by new
commands to the chosen channels
using the remote control, pressing
keys on the receiver or if the receiver
is removed from the wall socket.
Delay shut off
The function switches off the chosen
lights after a predefi ned time. You set
directly by channel/s or by group.
Channel/s:
1. Press [CH] followed by
the number.
2. Press [FUNCTION] fol-
lowed by [2]
3. State the length of the
delay you would like,
for example after 15
minutes.
The time can be stated
between 1-99 minutes.
NOTE! Pressing the key
again deactivates the
function.
Group:
1. Press [GRP] followed by
the number.