8
EN
CONTROLS & SETTINGS
NOTE
The dishwasher is programmed to re-
member your last cycle so you do not
have to reset each time. To start the
dishwasher using the same cycle and
options selected on the previous wash,
just press the START/CANCEL pad.
Child Lock Controls
To prevent children from accidently
changing the dishwasher cycle or starting
the dishwasher, lock the dishwasher
controls by pressing the OPTIONS pad
for 3 seconds while the door is latched.
An indicator light on the lock graphic
pad will illuminate when the controls
are locked and no new selections can
be made until the lock is released. To
Cycle and Option Chart
Cycle and Intended Use
Available
Options
Temperature;
Drying
Water
per cycle
(approx)
Duration*
(approx.)
Heavy Wash
Recommended for pots, pans,
casseroles and dinnerware having
light to heavily soiled loads.
High Temp
9 gal.
34 liters
2-3 HoursHeat Dry
Air Dry
Normal Wash
Recommended for lightly to heavily
soiled loads.
High Temp
2.9–7.6 gal.
11–29 liters
1¼ - 2¾
Hours
Normal
Heat Dry
Air Dry
1 Hour Wash
Recommended for lightly soiled loads
only.
Normal
4.3 gal.
16 liters
1 HourHeat Dry
Air Dry
NOTE
If the dishwasher door is opened while
the unit is running, the START/CANCEL
pad must be pressed and the door
shut immediately to return the unit
to the selected cycle and option, this
must happen within 10 minutes for the
unit to continue the cycle.
Delay 4 hr
The Delay 4 hr option allows you
to automatically delay starting your
dishwasher for 4 hours.
To activate delay start option for 4 hour
delay, press the Options pad once. A
light will come on indicating the Delay
4 hr option has been activated and
will remain on until cycle starts. Press
the START/CANCEL pad to start the
4 hr. countdown. If the delay option is
interrupted, the START/CANCEL pad
will have to be pressed again to return to
delay option.
To cancel the Delay 4 hr option and
begin the cycle before the delay period is
over, press and hold the START/CANCEL
pad for 3 seconds.
unlock the controls, press the same pad,
OPTIONS, again for 3 seconds until the
indicator light goes out.
Status Indicator Lights
• The CLEAN light will come on at the
end of cycle and remain on until the
door is opened.
To Next Page
Loading...
Need help?
General
