Immergas Victrix X 12 2 I User Manual

1
Wall-mounted condensing
VICTRIX 26 2 I
VICTRIX X 24 -12 2 I
1 VICTRIX 26 2 I FEATURES
Pre-mixed wall-mounted condensing boiler for central heating and
the production of DHW, with sealed chamber and fan-assisted with
nominal heat output of 23.6 kW in CH mode (26 kW in DHW
mode) with high eciency and fan-assisted circulation. By varying
the type of installation the classication of the boiler also varies.
OUTDOOR INSTALLATION (in partially protected place):
Appliance with direct air intake - if installed using a ue terminal
and the (optional) mandatory top cover kit, also eliminating a sealed
chamber intake cap.
Appliance type C
13
/ C
33
/ C
83
- if installed using the vertical or horizontal
concentric kits (cover kit recommended but not mandatory) or the Ø
80/80 separator kit without using the top cover kit.
INDOOR INSTALLATION:
Appliance type C
13
/ C
33
/ C
43
/ C
53
/ C
83
- if installed using the vertical
or horizontal concentric kits or the Ø 80/80 separator kit.
Appliance type B
23
- if installed using a ue kit and the (optional) man-
datory top cover kit, also eliminating a sealed chamber intake cap.
e boiler is made up of:
• total pre-mixing combustion systemwith steel multigasburner,
complete with ignition electrodes and ionisation control;
• pneumaticgasvalvewithdoubleshutter;
• primarygas/waterheatexchangerwithcasingincompositematerial
and stainless steel internal coil;
• combustion chamber in stainless steel internally isolated using
ceramic panels;
• fanforueevacuationwithelectronicallyvariablespeed;
• circuitfordisposalofcondensateincludingtrapandexibledi-
scharge pipe;
• secondarywater/waterexchangerfortheproductionofdomestic
hot water realised in stainless steel with 14 plates;
• hydraulicunitcomprisinga3-wayelectricvalve,anadjustable-speed
circulating pump with built-in air separator, automatic by-pass,
system ow switch, 3 bar safety valve for the primary circuit, a
system draining tting and lling valve;
• domestic hot water ow switch for detection of withdrawal of
domestic hot water;
• 8litreexpansionvesselsystemwithdiaphragm(real5.7)withpre-
load at 1.0 bar and manometer;
• wateroverheatingsafetythermostat,heatexchangersafetythermo-
fuse and ue safety thermofuse;
• central heating system temperature adjustment selector switch,
domestichotwatersystemtemperatureadjustmentselectorswitch,
operation selector switch (Stand-by, Summer, Winter, Reset), digital
display;
• controlpanelwithmicroprocessorP.C.B.with2sensorcontinuous
ame modulation (DHW and CH) with P.I.D. control, modulation
eld from 23.6 to 3.0 kW (26 kW in DHW mode);
• CHtemperaturerangeselection25-50°Cor25-85°C(settingas
per series);
• electronicignitionwithionisationcontrol;
• ignitionretarderin central heatingmode, anti-freezeprotection
system(to-5°C),pumpanti-blockdevicefunction,post-ventilation
function, chimney sweep function, pump functioning mode selec-
tion; preparation for connection to Immergas Comando Amico
Remoto remote control and timer thermostat, room thermostat,
external probe and control unit for area systems;
• self-diagnosissystemwithdigitaldisplayofthetemperature,fun-
ctioning mode and error codes by means of the back-lit display,
always available;
• IPX4Delectricalinsulationrating;
• possibilityofcouplingtothesystemforductingofexistinguesØ
60 mm and Ø 80 mm;
• connection unit (optional)withdepth-adjustablettingsonthe
hydraulic attachments and gas and domestic cold water cut-o
cocks.
Supplied complete with sample points for combustion analysis, lower
protection sumps.
Category II appliance
2H3
+, functions with a natural gas and L.P.G.
CE Marking.
It is available in the model:
•VICTRIX262I code3.019516
NOTA BENE: for correct installation of the boiler the Immergas "Green
Range" air intake/ue exhaust kit must be used.
VICTRIX262Iisthewall-mounted,instantsealedchamber
boiler with heat output of 23.6 kW in central heating mode and
26 kW in domestic hot water mode which, thanks to condensation
technology, is characterised for its particularly high eciency.
e innovative total premix combustion system and the special
environment-friendly burner mean it can run on natural or LPG
gas,guaranteeingextremelylowpollutantemissions(VICTRIX
26 2 I boiler belongs to the most environment-friendly class
envisionedbyEuropeanStandards-class5).eboilerischa-
racterised by its elegant Schumann design which together with its
compact size, make this boiler the ideal solution for integration in
kitchen wall units and small spaces and it also ts in with room
furnishings(only25cmdepth).e boiler is also type-approved
for functioning outdoors in partially protected places (standard
anti-freezeprotection-5°C,withoptionalkitfor-15°C).
e new microprocessor-controlled electronics allows optimum
control of temperatures both in central heating and domestic hot
water production modes and it may also be coupled to the exclu-
sive Comando Amico Remoto remote control and to the external
probe (both optional features), which allow to manage, control
and program the boiler at a distance with extreme simplicity, thus
optimisingfunctioningthroughclimaticheatadjustment.

Immergas Victrix X 12 2 I Specifications

General

Brand	Immergas
Model	Victrix X 12 2 I
Category	Boiler
Language	English