K BASIC - K SMART - K ECOSMART
32
KBASIC-KSMART-KECOSMART_(115V)_IM_20190204
APPLYING THE DRAFT
The draft is a device - consisting of two parts, A and B - which connects the door of the Minibar to the
door of the piece of furniture it is tted into, both when opening and when closing.
To install the draft, proceed as follows:
- screw the part A on to the door of the Minibar;
- open the door of the Minibar by 90°;
- screw the part B, perfectly horizontal, to the inside of the leaf of the piece of furniture, and t it into the
part A so it can work as a sliding guide.
30
9
20
150
5
27,5
45
45
189A0032
A
B
B
A
Warning!
To ensure a correct closing of the Minibar door, make sure that
the distance between the inner part of the unit door and the
outside part of the refrigerator door does not exceed 9 mm.