InFocus IN24 Supplementary Guide

ATTACHMENT: Current RoHS Exemptions
Current RoHS Exemptions include, but are not limited to the following:
1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp
2a. Mercury in straight fluorescent lamps for general purposes not exceeding 10 mg. in
halophosphate lamps
2b. Mercury in straight fluorescent lamps for general purposes not exceeding 5 mg. in
triphosphate lamps with a normal lifetime
2c. Mercury in straight fluorescent lamps for general purposes not exceeding 8 mg
triphosphate lamps with long lifetime.
3. Mercury in straight fluorescent lamps for special purposes
4. Mercury in other lamps not specifically mentioned in this list
5. Lead in glass of cathode ray tubes, electronic components and fluorescent tubes
6a. Lead as an alloying element in steel containing up to 0.35% lead by weight
6b. Lead as an alloying element in aluminum containing up to 0.4% lead by weight
6c. Lead as an alloying element in copper containing up to 4% lead by weight
7a. Lead in high melting temperature type solders (i.e. lead based solder alloys
containing 85% by weight or more lead)
7b. Lead in solders for servers, storage and storage array systems, network infrastructure
equipment for switching, signaling, transmission as well as network management for
telecommunications
7c. Lead in electronic ceramic items (e.g. piezoelectronic devices)
8. Cadmium and its compounds in electrical contacts and cadmium plating except for
applications banned under Directive 91/338/EEC amending Directive 76/769/EEC
relating to restrictions on the marketing and use of certain dangerous substances and
preparations (piezoelectronic devices)
9. Hexavalent chromium as an anti-corrosion of the carbon steel cooling system in
absorption refrigerators
10a. Deca BDE in polymeric applications
10b. Lead in lead/bronze bearing shells and bushes
11. Lead used in compliant pin connector systems
12. Lead as a coating material for a thermal conduction module c-ring
13a. Lead in optical and filter glass
13b. Cadmium in optical and filter glass
14. Lead in solders consisting of more than two elements for the connection between the
pins and the package of microprocessors with a lead content of more than 80% and less
than 85% by weight
15. Lead in solders to complete a viable electrical connection between semiconductor
die and carrier within integrated circuit Flip Chip packages
Xx 009-0000-00

InFocus IN24 Specifications

General

Matrix size	0.55 \
Number of colors	16.78 million colors
Native aspect ratio	4:3
Projection distance	- m
Vertical scan range	50 - 85 Hz
Horizontal scan range	15.85 - 85 kHz
Projection technology	DLP
Supported aspect ratios	4:3, 16:9
Contrast ratio (typical)	2000:1
Screen size compatibility	33.6 - 248.4 \
Projector native resolution	SVGA (800x600)
Keystone correction, vertical	25 - 30 °
Projector brightness (economic mode)	1360 ANSI lumens
Lamp type	SHP
Lamp power	200 W
Light source type	Lamp
Lamp power (economic mode)	160 W
Service life of light source	3000 h
3D	-
Full HD	No
Supported video modes	1035i, 1080i, 480i, 480p, 576i, 576p, 720p
Analog signal format system	NTSC, PAL, SECAM
Noise level	35 dB
Plug and Play	Yes
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	- W
Power consumption (typical)	250 W
Operating temperature (T-T)	10 - 40 °C
Focal length range	- mm
RS-232 ports	0
Maximum analog resolution	1024 x 768 pixels
RMS rated power	1 W
Number of built-in speakers	1
USB connector type	USB Type-B
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Placement	Desktop, Ceiling
Product type	Standard throw projector
Product color	Black, Silver

Weight and Dimensions

Weight	2700 g