47517929_ed3 EN-1
EN
Product Safety Information
Intended Use:
These Air Impact Wrenches are designed to remove and install threaded fasteners.
For additional information refer to Air Impact Wrench Product Safety Information Manual
Form 04580916.
Manuals can be downloaded from ingersollrandproducts.com.
Power Management System
For models that include a power management system, the system allows operator reduction
of maximum output power in the forward direction. The power management system does not
aect the output power in the reverse direction.
To adjust the power, rotate the Power Regulator to the desired level indicator.
The power level indicators are for reference and DO NOT indicate a specic power. The power
output can be further reduced in forward or reverse by using the variable throttle.
Product Specications
Models Style
Drive
Impacts
per
min.
Recommended
Torque Range
Type Size
Forward
ft-lbs (Nm)
Reverse
ft-lbs (Nm)
2135QXPA Pistol Square 1/2” 1250
700 MAX
(949 MAX)
780 MAX
(1057 MAX)
2135QXPA-2 Pistol
Square
extended
1/2” x 2” 1250
700 MAX
(949 MAX)
780 MAX
(1057 MAX)
2135PQXPA Pistol
Square
(Pin Retainer)
1/2” 1250
700 MAX
(949 MAX)
780 MAX
(1057 MAX)
Models
Impacting Sound Level dB(A)
(ISO15744)
Free Speed Sound Level dB(A)
(ISO15744)
Vibration (m/s²)
(ISO28927-2)
† Pressure
(L
p
)
‡ Power (L
w
) † Pressure (L
p
) ‡ Power (L
w
) Level *K
2135QXPA 90.7 101.7 86.0 97.0 13.3 4.6
2135QXPA-2 90.7 101.7 86.0 97.0 9.7 1.8
2135PQXPA 90.7 101.7 86.0 97.0 13.3 4.6
† K
pA
= 3dB measurement uncertainty * K = Vibration measurement uncertainty
‡ K
wA
= 3dB measurement uncertainty
Sound and vibration values were measured in compliance with internationally recognized
test standards. The exposure to the user in a specic tool application may vary from these
results. Therefore, on site measurements should be used to determine the hazard level in
that specic application.
To Next Page
Need help?
General
