‑7‑
● Maintenance & inspection must be carried out by personnel who have the necessary
electrical training and experience.
● Do not touch the terminals while the power is on. Failure to comply may result in electric
shock or malfunction.
● Disconnect all external power supplies of the system before cleaning the module. Failure
to comply may result in electric shock.
● Disconnect all external power supplies of the system before removing the module or
connecting/removing the communication wirings. Failure to comply may result in electric
shock or malfunction.
Safety Recommendations
● On‑site manual devices or other backup means must be equipped in the position where
the operator directly touches the mechanical parts, such as loading and unloading
mechanical tools, or the position where the machine runs automatically. The manual
devices and backup means, which can start or interrupt automatic operations of the
system, must be independent of the programmable controller.
● If you need to modify the program while the system is running, use the lock function or
other protective measures. Ensure that only authorized personnel can make the
necessary modifications.
Disposal
● Treat the scrapped product as industrial waste. Dispose of the battery according to local
laws and regulations.
● Recycle retired equipment by observing industry waste disposal standards to avoid
environmental pollution.
To Next Page
Loading...
Need help?
General
