Foreword
IS300 series servo drive is a servo drive which is specially designed for drive
permanent magnet synchronous servo motor (PMSM). IS300 series servo
drive has a wide capacity range˄the rated current is 5A to 300A˅.It’s able to
provide not only servo pump control, but also the general functional
requirements. And it is a high-power servo drive which is value-for-money in
the present market.
This manual is a guide to the operations of IS300 series servo drive.
This manual provides the user with related precautions and instructions for the
prototyping, installation, parameter setup, and on-site trial run, and routine
repair and maintenance of servo drive. In order to use this series of drive
correctly, please read this manual carefully prior to operation and keep it
properly for future using. The supporting equipment customers shall distribute
this manual together with the equipment to the final users.
Unpacking and inspection:
Please confirm carefully when unpacking the box:
1) If the model and drive rated values on the nameplate are the same as
your order. The box contains the equipment, certificate of conformity,
user manual and warranty card.
2) If the product is damaged during the transportation. If there is any
omission or damage, please contact our company or the supplier
immediately.
First time use:
The users who use this product for the first time shall read this manual carefully.
For any doubt on certain functions and performances, please contact the
technical support personnel of our company for help so as to use this product
properly.
With commitment to the constant improvement of the servo drive, our company
may change the information provided without additional notice.
efesotomasyon.com
To Next Page
Need help?
General
