34
Insignia 32"/46" LCD TV
www.insigniaproducts.com
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Selecting the device connected to the AUDIO
OUT jack
When you connect headphones, an amplifier, a
home theater system, or a sound bar to the
/AUDIO OUT jack on the back of your TV, a screen
opens to let you select the connected device. If the
connected device is an amplifier, home theater
system, or sound bar, you can select the remote
control you want to use to control the device’s
volume.
To select the device connected to the AUDIO
OUT jack:
1 Connect headphones or an audio device
(amplifier, home theater system, or sound bar)
to the /AUDIO OUT jack on the back of your
TV. The following screen opens.
2 If you connected headphones, press
S or T to
select Headphone, then press ENTER.
OR
If you connected an amplifier, home theater
system, or sound bar, press
S or T to select
Audio Out, then press ENTER. Press
S or T to
select Fixed or Variable, then press ENTER.
• Fixed lets you use the remote control that
came with the amplifier, home theater system,
or sound bar to control the device’s volume.
• Variable lets you use the remote control that
came with your TV to control the device’s
volume.
Playing TV audio only
You can turn off the picture on your TV and listen to
the program audio only.
To play TV audio only:
1 Press MENU. The on-screen menu opens.
2 Press
W or X to highlight Channels, then press
T or ENTER. The Channels menu opens.
3 Press
S or T to highlight Audio Only, then
press ENTER.
4 Press
S or T to select On.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Notes
• When a device is connected to the
/AUDIO OUT jack, the TV speakers are muted.
• When you disconnect the device connected to
the /AUDIO OUT jack, sound automatically
plays through the TV speakers.
Notes
The audio out screen disappears after a few seconds.
If you did not make a selection, you can select the
connected device (Headphone/Audio Out setting)
and remote control (Fixed/Variable setting) on the
Audio-Advanced Audio menu.
Headphone
Audio
Out
Fixed
Variable
Move
OK
ENTER
MENU
EXIT
Exit
Previous
Select
Requires you to use the amplifier or sound bars remote control
to adjust volume.
Notes
• Audio Only works only when the input source is
TV, and your TV is receiving a broadcast signal.
• To exit audio only mode, press any button.
When you exit audio only mode, the Audio
Only option is automatically reset to Off.
Move
OK
ENTER
MENU
EXIT
Exit
Previous
Select
Adjust settings to affect picture quality
Picture
Picture Mode
Brightness
Contrast
Color
Tint
Custom
60
Sharpness
Advanced V
ideo
Re s
et Picture Settings
60
60
0
50
Picture
Channels
Settings
PhotosAudio
Move
OK
ENTER
MENU
EXIT
Exit
Previous
Select
Play the audio with the picture turned off
Channels
Auto Channel Search
Add/Skip Channels
Favorites
Channel Labels
Channel Strength
Audio Only
Auto Zoom
PBS-HD
Off
On
Picture
Channels
Settings
PhotosAudio
To Next Page
Loading...
Need help?
General