Insignia NS-39D40SNA14 User Manual

32
NS-39D40SNA14 Insignia 39" LED TV
www.insigniaproducts.com
Using analog audio
When you connect a home theater system or sound bar to the /AUDIO OUT jack, the TV speakers are muted.
To connect a home theater system using analog audio:
1 Make sure that your TV’s power cord is unplugged and the home theater system or sound bar is turned off.
2 Connect a 3.5mm audio cable (not provided) to the /AUDIO OUT jack on the side of your TV and to the
AUDIO IN jacks on the analog home theater system or sound bar.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Turn on the home theater system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the home theater system or sound bar.
Notes
• For information about selecting the audio out mode for a home theater,
see the Headphone/Audio Out option in “Adjusting sound settings” on
page 43.
• You can connect headphones to the /AUDIO OUT jack. If you want to
use headphones, you need to disconnect the home theater system or
sound bar.
3.5mm audio cable
Home theater system
Side of TV
3.5mm audio
cable connector
/AUDIO OUT
jack
On your TV

Insignia NS-39D40SNA14 Specifications

General

Brand	Insignia
Model	NS-39D40SNA14
Category	TV
Language	English