MOUSE FEATURES INSTALLING THE BATTERY AND CONNECTING THE
MOUSE
1 Open the battery compartment and insert one AA battery (included).
Make sure that you match the + and – symbols in the battery
compartment.
2 Press the CONNECT button on the bottom of the mouse. The LED
indicator blinks twice to indicate your mouse is in pairing mode.
3 Pair your mouse to your computer.
PC:
1 Click the Bluetooth icon in your computer’s taskbar.
2 Click Add a Bluetooth device. Your computer searches for your
mouse.
3 Double-click Bluetooth 3.0 Mouse.
Mac:
1 Open System Preferences in the dock.
2 Click the Bluetooth icon.
3 Click + in the lower-left corner. Your computer searches for your mouse.
4 Double-click Bluetooth 3.0 Mouse.
Note: If your computer has never connected to a Bluetooth device, click Set
Up New Device to pair your mouse to your computer.
When pairing is complete, the LED indicator lights for two seconds.
TURNING YOUR MOUSE ON AND OFF
1 The rst time you use your mouse, turn it on by moving the on/o
switch on the bottom of the mouse to the on position.
2 If you don’t use your mouse for ve minutes, it switches to standby
mode to conserve the battery. To wake up your mouse, press any
button or move it.
Quick Setup Guide
|
NS-PNM6103-BK/NS-PNM6103-BK-C
Bluetooth Mouse
Before using your new product, please read these instructions to prevent any damage.
PACKAGE CONTENTS
• Bluetooth mouse
• AA battery (1)
• Quick Setup Guide
SYSTEM REQUIREMENTS
• Windows® 10, Windows®8.1, Windows®8, Windows®7, or
Mac OS 10.x or higher
• Built-in Bluetooth function or Bluetooth receiver
FEATURES
CONNECT
button
LED
indicator
FUNCTION
LED indicator
CONNECT button
DESCRIPTION
• Lights for three seconds when you turn on
your mouse.
• Blinks two times per second when your
mouse is in pairing mode.
• Turns o immediately when pairing is
complete.
• Blinks every ve seconds when the battery
is low; becomes more rapid when power is
almost gone.
Press to put your mouse in pairing mode.
On/o switch
To Next Page
Need help?
General