Insignia NS-PSB4521 Quick Setup Guide

Congratulations on your purchase of a high-quality
Insignia product. Your 2.1 Bluetooth Desktop
Speaker System is designed for reliable and
trouble-free performance.
Package contents
• Subwoofer with an attached 5-foot
(1.5-meter) power cord
• Right satellite speaker with an attached 5-foot
(1.5-meter) cable
• Left satellite speaker with an attached 5-foot
(1.5-meter) cable
• 3.5mm 5-foot (1.5-meter) stereo audio cable
• Quick Setup Guide
Before using your new product, please read these instructions
to prevent any damage.
FIND YOUR USER GUIDE ONLINE!
We are going green so a copy of your User Guide
is not provided in the box but is available online.
Go to www.insigniaproducts.com, then click
Support & Service. Enter your model number in
the box under Manual, Firmware, Drivers &
Product Information, then click .
Features
Setting up and turning on
1 Plug the cable attached to the right speaker into
the R jack on the subwoofer.
2 Plug the cable attached to the left speaker into
the L jack on the subwoofer.
3 Plug the power cord attached to the subwoofer
into a power outlet.
4 Press the Power/pairing button for about
half a second. Your speaker system turns on.
5
Follow one of the connection methods (Bluetooth or wired)
to connect the speaker system to a source.
Connecting with a Bluetooth device
Pairing with a Bluetooth device
1 Make sure that your speaker system is turned on.
2 If the blue LED is not blinking rapidly, press and
hold the Power/pairing button for three
seconds.
3 Make sure that your Bluetooth device is within
33 feet. (10 meters) of your speaker system.
4
On your source device, turn on the Bluetooth feature,
then set your device to pairing mode. (For instructions,
see the documentation that came with your Bluetooth
device.) On your Bluetooth device, select
Insignia NS-PSB4521.
Your speaker system pairs with the Bluetooth device and
the blue LED lights continuously.
Note: If you are pairing with a computer, make sure
that your Bluetooth speaker is selected as the
computer’s default playback device. See the
computer’s documentation for instructions.
Make sure that your Bluetooth device supports
the Bluetooth 3.0 + EDR A2DP protocol and that
your device is not paired with another device.
To determine what Bluetooth protocol your device
supports, see the documentation that came
with your device.
Reconnecting to a paired device
1 If your speaker system is turned off, turn it on.
2 Make sure that your Bluetooth device is turned on,
the Bluetooth feature on the device is turned on,
and the device is within range of your speaker
system with no obstructions between your speaker
system and the device.
Note: If your speaker system and your Bluetooth device
do not automatically re-pair, select Insignia
NS-PSB4521
on your Bluetooth device.
Right speaker
(front)
Subwoofer
(right)
Right speaker
(back)
Left speaker
(back)
Right speaker
(front)
Subwoofer (right)
Volume knob
Power/pairing button
Bass knob
LED
Left speaker
(back)
Audio
cable
Right speaker
(back)
Audio
cable
AUX jack
R jack
L jack
Power cord
Vol Bass Power/pairing
Bass Power/pairing
4
1
2
3
Quick Setup Guide
2.1 Bluetooth Desktop Speaker System
I
NS-PSB4521
When the LED is... Your speaker set is...
Blue and blinks rapidly In pairing mode
Blue and lights continuously Paired to a Bluetooth device
Blue and blinks slowly Not paired to a Bluetooth device
Green In AUX IN mode
O In sleep mode

Insignia NS-PSB4521 Specifications

General

Brand	Insignia
Model	NS-PSB4521
Category	Speaker System
Language	English