Insignia NS-RTM10SS2-C User Manual

www.insigniaproducts.com
11
10 Cu. Ft. Top Mount Refrigerator
8 Move the hinge hole sleeve from the top right side of the refrigerator door to the top left side of the door, then move
the hinge hole cover from the top left side of the refrigerator door to the top right side of the door. Set the refrigerator
door aside.
9 Remove the screw hole covers from the center left side of the refrigerator and install them in the center right side of the
refrigerator.
10 Lay the refrigerator on its back and remove both adjustable feet from the bottom of the refrigerator, then remove the
production-use screw. This screw is for production use only and is not needed after reversing the door.
11 Remove the screws that secure the lower hinge to the right side of the refrigerator, then remove the hinge.
12 Remove the screw hole covers from the bottom left side of the refrigerator and install them in the bottom right side of
the refrigerator.
Hinge hole cover
Hinge hole sleeve
Refrigerator door
Screw hole cover
Bottom of
refrigerator
Adjustable foot
Adjustable foot
Production-use screw
Lower hinge
Front of refrigerator
Screw hole covers
Front of refrigerator

Insignia NS-RTM10SS2-C Specifications

General

Brand	Insignia
Model	NS-RTM10SS2-C
Category	Refrigerator
Language	English