Insignia NS-SP213 User Manual

LEFT RIG
Connecting your speakers
1 Loosen all speaker and amplier terminals.
2 Strip approximately 1/2" of insulation from the ends of your speaker wire
(not provided).
3 Connect the red (+) speaker terminals to the red (+) amplier terminals
with your speaker wire, then tighten the terminal connectors.
4 Connect the black (-) speaker terminals to the black (-) amplier terminals
with your speaker wire, then tighten the terminal connectors.
See the documentation that came with your amplier or home theater
system for more information on connecting the cables.
Note: For best performance, speaker wires must be connected correctly. All two-conductor
wire is marked in some way to
help with this. One side will be
marked with a colored stripe,
raised rib, or dierent-color
conductor. Use the marked
side for the “red” connections.
We recommend using
18-gauge or heavier speaker
wire.
Package contents
• Speakers (2)
• Rubber feet (8)
• Rubber feet alignment tool
• Quick Setup Guide
Quick Setup Guide
5-1/4" 2-Way Bookshelf Speakers (Pair)
I
NS-SP213
Congratulations on your purchase of a high-quality Insignia product. Your 2-Way Bookshelf Speakers are designed for reliable and trouble-free performance.
Positioning your speakers
Optional: Attach the adhesive-backed cushioned feet to
the base of the speakers. Use the rubber feet alignment
tool to help with alignment.
Amplier/home theater system
Note: Make sure to
connect the + terminal on
the speaker to the
+ terminal on the amplier
and connect the - terminal
on the speaker to the
- terminal on the
amplier.
NS-SP213
NS-SP213
Before using your new product, please read
these instructions to prevent any damage.
Back of speaker
Back of
amplier

Insignia NS-SP213 Specifications

Speaker Specifications

nominal impedance	8 ohm
frequency response	80Hz - 20kHz

Weight and Dimensions

speaker height	10.9 in (27.8 cm)
speaker width	6.3 in (16.0 cm)
speaker depth	6.7 in (17.0 cm)
speaker net weight	5.9 lbs (2.7 kg)