Intex 59703EU User Manual

©2015 Intex Marketing Ltd. - Intex Development Co. Ltd. - Intex Trading Ltd. - Intex Recreation Corp.
All rights reserved/Tous droits réservés/Todos los derechos reservados/Alle Rechte vorbehalten.
Made in China/Fabriqué en Chine/Hecho en China/Hergestellt in China.
®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous licence de/Marcas registradas
utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen Ländern der Welt in Lizenz von/Intex Marketing Ltd. to/à/
a/an Intex Trading Ltd., Intex Development Co. Ltd., G.P.O Box 28829, Hong Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach, CA
90801 • Distributed in the European Union by/Distribué dans l’Union Européenne par/Distribuido en la unión Europea por/Vertrieb in der Europäischen
Union durch/Intex Trading B.V., Venneveld 9, 4705 RR Roosendaal – The Netherlands
(153) ENGLISH 4.875” X 7.25” 03/28/2012
6148
SAVE THIS INSTRUCTIONS
6148-***R0-1601
Read, understand, and follow all instructions carefully before using this product.
INTEX
®
OWNER'S MANUAL
• No protection against drowning. Swimmers only.
• This is not a life saving device.
• Never allow diving or jumping onto or from this product.
• Never leave in or near the water when not in use.
• Never use in high wind, rapid currents, open water or dangerous tides.
• Do not exceed the maximum recommended weight capacity.
• Distribute the weight of person(s) and/or load evenly.
• Do not use the device if you suspect a puncture or leak.
• Nottobeusedwhileconsumingorundertheinuenceofalcoholordrugs.
• Not for white water rafting or any other extreme sports activities.
• Never use when tired or fatigued.
• Use only in water away from debris and obstructions.
• Design working pressure: 0.03 bar.
Not following these guidelines may result in drowning or other serious injury. The product
warnings, instructions, and safety rules provided with the product represent some common
risks of using water recreating devices and do not cover all instances of risks and/or danger.
WARNING
* For a full and complete description of each safety information symbol and safety sign printed on the product and the
packaging please refer to the “Denition” section or sheet.
Inating Instructions
1. Locate a clean area free of stones or other sharp objects.
2. Adultsshouldinateeachchamberinnumberedsequence(ifmarked)slowlywithafootormanuallyoperatedair
pump.Makesurethedeviceisrmtothetouchbutnothard.CAUTION:Topreventbursting,donotoverinate,use
high pressure air compressor or exceed the recommended design working pressure. Fill with cold air only. The product
hastobeinateduntilyoucanstillrecognizesmallfoldsintheareaaroundthearmrests(i.e.belowthecup-holdersif
any), the backrest and/or the side edges. Also compare this pressure with the large main chamber.
3. Closeandrecessallinationvalvessecurely.
4. EnsurethatadequateairpressureismaintainedintheproductduringuseVerifythepressurefrequently,especiallyon
very hot or cold days, using the air pressure checking method described in the instructions.
Maintenance
1. Check seams and valves regularly for tears.
2. Clean the device after each use with a garden hose and air dry thoroughly before storage.
3. Ifthisproductisusedinanindoorswimmingpool,ensurethatthereissufcientheadroom.
Storage
1. Ensurethedeviceisthoroughlycleananddryrst,seemaintenancesection.
2. Openallairvalvesanddeatethedevicecompletely.
3. Remove all accessories if applicable.
4. Fold the device loosely and avoid sharp bends, corners and creases which can damage the device. Replace all
inationvalvescaps.
5. Store in a dry place and indoors.
Repair
Thedevicecomeswitharepairpatch.Ifyouhaveanideawheretheleakis,useamixofdishwashingliquidandwaterin
a spray bottle, and spray over the suspicious areas. Any leak will produce bubbles that will pinpoint the location of the leak.
Thoroughly clean the area surrounding the leak to remove any dirt or grime.
Cut a piece of repair patch large enough to overlap the damaged area by approximately 1.5 cm (1/2”). Round off the edges,
andplacethepatchonthedamagedareaandpressdownrmly.Youmaywanttouseaweightontoptokeepitinplace.
Donotinateinonehourafterpatching.
If the patch does not hold, you can purchase silicon or polyurethane based glue for repairing camping mats, tents or shoes
from your local shop or market to patch the device; please refer to the instruction of the glue for patching.

Intex 59703EU Specifications

General

Brand	Intex
Model	59703EU
Category	Boat
Language	English