ITech IT6952A User Manual

Function and Features
Copyright ©ITECH Electronic Co., Ltd. 17
MUX
ADDR. Address can be set
within 0-30
USB
BEEP (ON)
OFF
Close the key sound
ON
Open the key sound
KNOB (ON)
LOCK
Lock the rotary knob function
ON
Unlock the rotary knob function
TRIG (MANUAL)
MANU
Local keyboard trigger
BUS
External trigger
MEM (GROUP1) GRP1-8 Save and recall operation
ADC SPEED
SLOW AD speed is low speed
MID AD speed is middle speed
FAST AD speed is high speed
METER RETURN
WAIT 5 S
In the voltage/current setting state (or the LOCK
state to view the set value), if
there is no operation
in 5S
, it will automatically return to the
measurement state.
NO
It does not automatically return to the
measurement state.
TIMER SET
OFF
Close the timer function
ON
Open the timer operation,
the time can be set
within 0.1-99999.9s
RESET
NO
keep the original setting
YES
restore the factory setting
EXIT
Quit the menu setting
LIST SET
LIST STATE
OFF
Close list test function
ON
Open list test function
LIST LOAD
Recall the saved list file
(FILE0-FILE9)
LIST EDIT
TIME (SEC)
SEC
second
MIN
minute
VSET
Setup the single step voltage
ISET
Setup the single step current
SEC
Setup single step delay time(0.1-9999)
NEXT (YES)
YES
continue the edit of next step
NO
End up the list file edit
REPET
1-65535
Set the cycle time of list file
SAVE
NO
Do not save the current list file
FILE0-FILE9
Save the list file to appointed
document
EXIT
Quit the system menu
POWER
INFO
MODEL
Unit model
VER
The software version
SN-1
The first six number of SN

ITech IT6952A Specifications

General

Brand	ITech
Model	IT6952A
Category	Power Supply
Language	English