en-39
5 CONTROLS
5.2.Z.42 CROSS CUT _____________________________________________________
Select cross cut
and accept
5.2.Z.43 CROSS CUT ACTIVE / INACTIVE ____________________________________
Use the button up and down to move between cross cut active and not active.
Press the button .to accept.
Press the button to return to previous menu
5.2.Z.44 VEHICLE SPEED _________________________________________________
Vehicle speed
Select the vehicle speed
and accept
5.2.Z.45 MAXIMUM SPEED SETTINGS MENU _________________________________
Use the button up and down to move
between transport and mow speed and creep speed.
Press the button .to accept.
Select which transport and mow speeds are needed
in forward and reverse
Use the button up and down to move to the
needed speed.
Press the button to save.
Press the button to return to previous menu
Do the procedure for creep mode.
Cross Cut
Cross Cut active
Pin Menu
Cruise Control
Cross Cut
Vehicle Speed
Change PIN
Pin Menu
Cruise Control
Cross Cut
Vehicle Speed
Change PIN
Max Speed Settings Menu
Transport and Mow Speed
Creep Speed
Max Speed Menu
Transport
FW 24 km/h
RVS 8 km/h
Mow FW 11 km/h
RVS 8 km/h
To Next Page
Loading...