HEY THERE!
JUST CHARGE IT
WE’RE HERE TO HELP. CONTACT US!
HX-P215
USER GUIDE AND
WARRANTY INFORMATION
You’ve got questions? We’ve got answers.
Contact a Consumer Relations representative by
phone or email to help answer any questions.
Please be sure to have the model number of your
product available. (Hint: It’s HX-P215)
Register your speaker! Information about where
you bought it and how you’re using it is like
gold for the people who make these speakers.
To register, visit:
USA: www.jamaudio.com/customer-support/product-registration
CAN: http://canada.jamaudio.com/product-registration
Charging the speaker is so easy you’ve probably figured it out by now, but just in case, you’ve got two options: you can charge it
using your computer or a wall outlet. The Rave Plus needs about 3 hours for up to 4 hours of party time.
The LED lights on your speaker let
you know what it’s doing.
1. The cord that came with the speaker — the one
with the USB on one end and the micro USB on the
other — will work with your computer.
2. If you want to use the wall outlet, you’ll need to
pick up a power cord with a micro USB the next
time you’re at the store, or use any USB AC
adapter, including the one for your cell phone.
SHED SOME LIGHT
BLUETOOTH
®
CONNECTION — IT’S A SETUP
Like any amazing couple, this one starts with a connection — one between
your device and the speaker’s Bluetooth. Here’s how it works:
1. Make sure the smartphone, tablet, or computer you’re using with the
speaker has Bluetooth.
2. Turn on the speaker (press and hold the power button for 3 seconds)
and look for the little blinking light.
3. Do whatever your device needs you to do on its end.
4. Look for Jam Rave Plus in your device’s Bluetooth list or click YES.
5. Now hit Play on your speaker and crank it up — or down if you’re lame.
USA
cservice@jamaudio.com
1.888.802.0040
8:30am–7:00pm EST M–F
cservice@homedicsgroup.ca
1.888.225.7378
8:30am–5:00pm EST M–F
CANADA
The device and Bluetooth will find each other every time, as long as the
speaker is set to Bluetooth and your device’s Bluetooth is, you know, on.
If you’re connecting to a computer, you may have some extra steps on
that end. You’ll have to get that information from the computer company.
Depending on your device, you may be prompted to enter a pairing
code. If prompted, enter “0000” as the code.
To disable pairing of an existing device and pair a new device, press and
hold the +/- button for 5 seconds to activate pairing mode.
Note: If you turn on your Rave Plus but haven’t started the party yet, it
will automatically power off after 2 minutes of unpaired inactivity.
Note: Once you've paired, if you pause the party for 15 minutes or more,
the JAM Rave Plus will automatically shut off to preserve battery power.
Thank you for purchasing
the JAM RAVE PLUS.
Check out the sections
below for all the important
information about your
new speaker.
Pairing Mode
Bluetooth Light Battery Light
Connected
Charging
Ready to Party
Aux-In Mode
Low Battery
Continued on page 2.
AC adapter not included.
CONTROL YOUR DESTINY ... OR AT LEAST YOUR SPEAKER
JAM Rave Plus
Bluetooth
®
Devices
3h
A – On / Off
B –
Volume down / Previous track
C –
Play / Pause
D – Volume up / Next track
E – Bluetooth Light
F –
Battery Light
3s/
0.5s
3s
0.5s
/
To Next Page
Need help?
General
