Once enter capture mode, there will be an indicator on left top corner to
indicate it is in live view mode. When the film holder is inserted into the slot,
the image always shows the positive image according to preview defined film
type (after power on, the film type is default to negative film). Reconfirm the
film position through the display before press SCAN button.
User can also press ENTER button, then press LEFT/RIGHT button to adjust
EV value, press ENTER button again to confirm and back to live view mode.
1.3 Capture: Edit Menu
Selected image
Save: save captured image
Cancel: cancel any editing with this image
Home: back to main menu
1.4 Live view Capture/Edit Menu
SCAN
ENTER
To Next Page
Loading...
Need help?
General
