JBL Incorporated, 8500 Balboa Boulevard, P.O. Box 2200, Northridge, California 91329 U.S.A.
JBL CONTROL 25T/WH REV H
PACKAGE
WIRING DIAGRAM
09-06
Technical Manual
JBL CONTROL 25T/WH
SPECIFICATIONS
ACOUSTIC & ELECTRICAL SPECIFICATIONS:
• Nominal Impedance: 8 ohm
• Power Capacity: 150W Continuous Program
• Frequency Range: 80 Hz to 15 kHz (–10 dB)
• Crossover Frequency: 3 kHz
SYSTEM COMPONENTS:
• Cabinet: Not For Sale
• Grille: 128-00163-60
• Low Frequency 135mm (5.25 in.) Cone
Transducer: Transducer (124-10000-00)
• DC Resistance: 5.6 ohm ±5% Copper Wire
• Tap Settings: 100V Line: Tap 1 = 7.5W, Tap 2 = 15W
Tap 3 = 30W, Tap 4 is not used
70V Line: Tap 1 = 3.7W, Tap 2 = 7.5W
Tap 3 = 15W, Tap 4 = 30W
SYSTEM COMPONENTS:
(cont’d)
• High Frequency 19mm (0.75 in.) Polycarbonate
Transducer: Dome Tweeter (123-00001-00)
• DC Resistance: 6.7 ohm ±5% Copper Wire
• Crossover Network: 338142-001
AURAL SWEEP TEST SPECIFICATIONS:
A. System Aural Sweep Test: 7.0V Input, 20 Hz to 20 kHz
B. L.F. Aural Sweep Test: 7.0V Input, 20 Hz to 1.2 kHz
C. H.F. Aural Sweep Test: 2.83V Input, 2 kHz to 20 kHz
PHYSICAL SPECIFICATIONS:
• Enclosure Dimensions: 231mm x 183mm x 140mm D
(9.5 x 7.3 x 5.6 in. D)
• Shipping Weight: 11 lbs. (5 kg.) (in Pairs)
(Net Weight 5lbs. Each)
WARRANTY INFORMATION:
• Refer to Warranty Statement packed with each product.
Warranty 59660
Owners Manual 980-00024-00
Foam Pad (2)
991-00053-00
Packaging
Carton
990-00038-00
Network
338142-001
SCHEMATIC CONTROL 25 (338142-001)
Speaker,
High Freq
123-00001-00
Speaker,
Low Freq
124-10000-00
RED
BLK
BLUE
BLK
R1
6
R2
6
R3
5
SK3 SK3
C1
1µ5
C2
12µF
L2
1mH
H.F.
123-00001-00
L.F.
124-10000-00
BLUE
BLK
RED
BLK
INPUT
NOTE: INDIVIDUAL PARTS FOR THE ABOVE CROSSOVER ARE NOT AVAILABLE.
A COMPLETE REPLACEMENT ASSEMBLY SHOULD BE ORDERED.
SK3 LAMP IS AVAILABLE SEPARATELY.
RED
BLK
WHITE
BLUE
VIOLET
ORANGE
3
2 YEL
Transformer
1 GRN
4
5
6
Not
Used
Switch
546-00003-00
–
–
To Next Page
Need help?
General