CSS8008 INSTALLATION INSTRUCTIONS

Commercial Series Ceiling Speaker

1. Install according to diagram.

2. Connect leads according to Tap Wiring chart.

3. Cut off bare portion of unused leads and

terminate with wire nuts.

Note: Always install in accordance with applicable

electrical and building codes.

Tap Wiring:

Orange Green Gray Yellow Black

25V 0.7W 1.3W 2.5W 5W COM

White

Blue

Brown

Orange

Black

70V 0.7W 1.3W 2.5W 5W COM

100V 1.3W 2.5W 5W N/C COM

Ceiling Material

JBL Professional

8500 Balboa Boulevard, P.O. Box 2200

Northridge, California 91329 U.S.A.

CSS8008 Instr 06/10

CSS8008 Speaker

Speaker screws (sheet metal screws)

M4 x 40 mm (4 places, packaged with

speaker)

Install screw through thru-hole in

speaker, screw into clip nut in back can

Tile Rails CSS-TR4/8 (x2)

Secure to ceiling/grids in manner required

by local building code.

Back Can CSS-BB8

Back Can / Tile Rail screws (machine

screws) M4 x 8 mm (4 places, packaged

with back can)

Install screw through thru-hole in

back can, and screw into tile rail.

Questions and Answers:

Need help?

Do you have a question about the JBL CSS8008 and is the answer not in the manual?

JBL CSS8008 Specifications

General