12
System Type:
Self powered 15", two-way, bass-reflex
Frequency Range (-10 dB):
45Hz - 20kHz (EQ in flat position)
Frequency Response (±3 dB):
52Hz - 20kHz (EQ in flat position)
Coverage Pattern:
70º x 70º nominal
Directivity Index (DI):
10.3 dB
Directivity Factor (Q):
10.8
Crossover Modes:
DSP controlled 48dB filter slope
Crossover Frequency:
1.6kHz
System Power Rating:
500 W continuous, 1000W peak
LF Power amp:
Class-D, 400 Watt (continuous) at driver impedance
HF Power amp:
Class-D, 100 Watt (continuous) at driver impedance
Distortion:
Less than 0.1% at rated power
Maximum Peak Output:
133dB SPL
1
Signal indicators:
Overload: Red LED indicates input overload condition
Signal: Green LED indicates signal presents
Input sensitivity:
Mic position: -25 dBu to 0 dBu
Line position: +28 dBu to +10 dBu
Input Impedance:
64 K Ohms (balanced), 32 K Ohms (unbalanced)
EQ:
Presets for Main and Monitor position
LF Driver:
1 x JBL 265F 380 mm (15 in) Differential Drive
®
woofer
HF Driver:
1 x JBL 2408H 37.5 mm (1.5 in) annular polymer diaphragm,
neodymium compression driver
Enclosure:
Trapezoidal, 18 mm, plywood with polypropylene end caps
Suspension / Mounting:
Dual 36mm pole socket
Transport:
2 x die-cast handles with backing cup
Finish:
Anthracite DuraFlex™ finish
Grille:
Powder coated, Anthracite, 18 gauge perforated steel
with acoustical transparent black foam backing.
Input Connectors:
Balanced XLR / 1/4 inch combo jack with XLR loop through,
Dimensions (H x W x D):
815 mm x 440 mm x 465 mm
(32 in x 17.25 in x 18.25 in)
Net Weight:
26 kg (57 lb.)
PRX515
1
Maximum Peak output measured with IEC pink noise at 1 meter in front of speaker baffle under free space conditions. Measurement instrument
set to peak hold. Speaker muted and released at full power, recording maximum peak level.
To Next Page
Loading...
Need help?
General
