JBL PRX615M User Manual

SYSTEM SET UP - FULL RANGE MODELS
PRX600 Amplifier Input Configuration for
PRX612M, PRX615M, PRX625 and PRX635 Full-Range Models:
1
234 5
6
7
8
9
10
Features
1 - EQ BOOST / FLAT: When set in the “FLAT” position, frequency response is linear and unaltered. When
“Boost” is selected, internal equalization is applied to enhance low frequency and high
frequency response. “FLAT” will provide greater accuracy of reproduced music, higher
speech intelligibility and maximum overall level. “BOOST” is particularly useful at lower
levels to enhance the low and high frequencies of pre-recorded music. The feature
provides flexibility without the need to use an external equalizer. The following graph
shows the effect of the “BOOST” setting.
MAIN/MONITOR: Switching between “MAIN” and “MONITOR” optimizes the system for use as either a main
full-range system, or a stage monitor. (PRX612M and PRX615M only).
19

JBL PRX615M Specifications

General

Frequency Range	45 Hz - 20 kHz
Coverage Pattern	90° x 50° nominal
Amplifier Design	Class D
Crossover Frequency	1.8 kHz
Power Rating	1000W
Max SPL	135 dB
Input Connectors	2 x XLR-1/4" Combo
Input Impedance	20 kOhms (balanced)
LF Driver	1 x 15" Differential Drive
HF Driver	1 x 1.5" Neodymium Compression Driver
Amplifier Power Rating	1000W
Enclosure	plywood
Suspension / Mounting	M10 suspension points
Transport	Integrated handles
Finish	Duraflex Coated
Grille	Powder coated, Obsidian, perforated steel