EasyManuals Logo
Home>JBL>Speaker System>PRX715

JBL PRX715 Specifications

JBL PRX715
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ROAD TOUGH CONSTRUCTION
Built from a combination of 25 mm (on the top and bottom for
added rigidity) and 18 mm, strong, light-weight poplar plywood
made structurally sound with tongue and groove joints. JBLs tour
proven DuraFlex™ fi nish, grilles from dent-resistant 16 gauge
steel, and light-weight glass-fi lled nylon handles ensure strength
and durability. All M10 suspension points are constructed from 14
gauge steel and have been tested with a yield-strength of 1000
lbs. each. A seriously rugged package that will withstand the
brutality of constant road use.
AMPLIFICATION
Highly ef cient Class-D ampli cation drives Maximum Sound
Pressure Levels are the best indication of the performance of
a powered speaker and all PRX700 Series excel in this critical
speci cation. JBLs ability to maximize the speaker and ampli er
performance guarantees ample power, accurate dynamics and
sonic purity.
15" TWO-WAY FULL-RANGE
MAIN SYSTEM/FLOOR MONITOR
COMPACT, ULTRA-LIGHTWEIGHT SYSTEMS…
PERFORMANCE YOU CAN TRUST
The PRX715 is the next step in the highly successful PRX Series and introduces
the fi rst use of JBLs patented Differential Drive
®
Technology with ferrite drivers.
Differential Drive technology incorporates lower mass in the ferrite magnet
for reduced weight while maximizing power amp ef ciency for greater heat
dissipation and increased power handling. Powering the PRX715 is a 1500 Watt
high performance, exceptionally low distortion biamplifi cation system engineered
to deliver clean power with maximum headroom to effi ciently deliver smooth
high frequencies and rich, deep bass response even at very high sound power
levels. Compact, ultra-lightweight, the PRX715 uses JBLs tour tested technology
throughout so you can trust it to deliver a lifetime of reliable performance.
47.5 LB / 21.6 KG
FOR EASY PORTABILITY
1500 WATT
HIGH-PERFORMANCE
POWERED SPEAKER SYSTEM
BEST IN CLASS COVERAGE
90
°
H/50
°
V
KEY FEATURES
HIGH PERFORMANCE DRIVERS
37.5mm (1.5 in) Annular Polymer Diaphragm, Neodymium
Magnet Compression Driver Resulting in Crystal Clear Highs
and Sonic Accuracy. Wide coverage angles are achieved
without compromise and harmonic distortion is minimized for
maximum driver SPL without harshness.
LOW FREQUENCY
JBLs Tour Tested Differential Drive
technology provides better
heat dissipation, lower power compression and higher dynamic
range versus conventional single-coil designs resulting in better
sound quality and higher SPL. In addition, PRX700 woofers use
magnetically saturated pole-pieces and an aluminum shorting ring
which signifi cantly reduces nonlinear distortion.

Other manuals for JBL PRX715

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JBL PRX715 and is the answer not in the manual?

JBL PRX715 Specifications

General IconGeneral
Bass reflexYes
Product colorBlack
Recommended usage-
Magnet typeNeodymium
Speaker type2-way
Tweeter diameter37.5 mm
Number of drivers2
Speaker enclosureClosed
Speaker placementFloor, Tabletop/bookshelf
Audio output channels1.0 channels
Number of tweeter drivers1
Woofer diameter (imperial)15 \
Tweeter diameter (imperial)1.5 \
Amplifier classD
Amplifier output power1500 W
Impedance- Ω
Frequency range42.9 - 19500 Hz
RMS rated power- W
Crossover frequency1700 Hz
Amplifier input impedance20000 Ω
Number of amplifier channels2 channels
Connectivity technologyWired
AC input voltage100 - 240 V
Power source typeAC
AC input frequency50 - 60 Hz
Weight and Dimensions IconWeight and Dimensions
Depth358.71 mm
Width445.13 mm
Height714.43 mm
Weight21600 g

Related product manuals